Home / Services / EV Charger Installation

EV Charger Installation in Brooklyn, NY

Brooklyn House Rewiring installs home EV chargers on dedicated circuits sized correctly for fast, safe charging. A Level 2 home charger runs on a dedicated 240-volt circuit, typically 40 to 50 amps, and that circuit has to be sized by a load calculation against everything else the home draws. In many older Brooklyn homes the existing panel does not have the capacity or the open space, so an EV install often pairs with a panel upgrade. We handle the load calculation, the dedicated circuit, the charger or outlet, and any panel work, all under a NYC electrical permit performed by a licensed master electrician and inspected. Charging at home should be effortless, and a proper install makes it so.

A Dedicated 240V Circuit Sized by Load Calculation

A Level 2 charger needs its own dedicated 240-volt circuit, usually 40 to 50 amps, wired with the correct conductor size and breaker for the charger's rating. We do not simply pick a breaker, we run a load calculation to confirm the panel can carry the new circuit alongside the home's existing loads. That calculation determines whether the panel has room as-is or needs upgrading first. Getting the circuit sized right is what lets the charger deliver full speed without nuisance tripping.

When an EV Install Needs a Panel Upgrade

Older Brooklyn homes were never wired with EV charging in mind, so a 100-amp service or a full panel often cannot absorb a 40 to 50-amp charging circuit. When the load calculation shows there is not enough capacity, we upgrade the panel or service to 200 amps as part of the project. That way the charger goes on a service with real headroom rather than a stretched one that trips. We flag this up front so there are no surprises in the quote.

Charger, Outlet, and Placement

We install hardwired wall chargers or a dedicated NEMA 14-50 outlet for a plug-in unit, mounted where it reaches your parking spot cleanly, whether that is a garage, a driveway, or the side of the house. Conductors are run in cable or conduit as the location requires, protected against the elements outdoors, and landed on a dedicated breaker. We work with the charger you have chosen or advise on one sized to your vehicle. The finished install is neat, weatherproof where it needs to be, and ready to charge.

Service area

Level-2 EV charging circuits go into homes and garages across Brooklyn, including Park Slope, Fort Greene, Cobble Hill, Carroll Gardens, and Brooklyn Heights.

Call (347) 252-8522Book